SEARCH WHAT YOU WANT
PPS500B
● The design system consists of ternary lithium 8s5p battery protection board, DC charging circuit,
● MCU control circuit, inverter circuit and LCD screen. Inverter 500W pure sine wave AC220V / 50Hz, subject to pure resistance load, DC12V / 10A, USB QC3 0, TYPE-C PD3. 0 It is suitable for camping, emergency communication, medical rescue, fire rescue and other fields.
● The design system consists of ternary lithium 8s5p battery protection board, DC charging circuit,
● MCU control circuit, inverter circuit and LCD screen. Inverter 500W pure sine wave AC220V / 50Hz, subject to pure resistance load, DC12V / 10A, USB QC3 0, TYPE-C PD3. 0 It is suitable for camping, emergency communication, medical rescue, fire rescue and other fields.
Previous page: PPS500A
Next page: No more
Product Details
Attention
● Strictly follow the operation steps of the product.
● For the heat dissipation space of the product, 5cm space is reserved around the product to make the heat dissipation convective.
● When the power of the product is insufficient, the load power exceeds the rated power or the ambient temperature is too high, the product will automatically start the protection function and turn off the output.
● For power charging, it is recommended to charge without load.
● If the power supply is not used for a long time, the power supply itself will be exhausted. Please make sure to charge it every 6 months.
● It is forbidden to use this product in flammable, explosive and corrosive gas environment such as gasoline and gas.
● If the product is accidentally flooded or invaded by other foreign substances, please send it to the
● Distribution Office for testing and treatment as soon as possible to ensure the safe use of the product. If it is caused by abnormal use, the company will charge for treatment according to the actual situation.
Precautions for Product Operation
● Strictly follow the operation steps of the product.
● For the heat dissipation space of the product, 5cm space is reserved around the product to make the heat dissipation convective.
● When the power of the product is insufficient, the load power exceeds the rated power or the ambient temperature is too high, the product will automatically start the protection function and turn off the output.
● For power charging, it is recommended to charge without load.
● If the power supply is not used for a long time, the power supply itself will be exhausted. Please make sure to charge it every 6 months.
● It is forbidden to use this product in flammable, explosive and corrosive gas environment such as gasoline and gas.
● If the product is accidentally flooded or invaded by other foreign substances, please send it to the Distribution Office for testing and treatment as soon as possible to ensure the safe use of the product. If it is caused by abnormal use, the company will charge for treatment according to the actual situation.
Product Scenarios
Specification
|
Model |
PPS500B |
|
|
Capacity |
4000m A h * 8 Series 5 parallel |
|
|
Cell |
26700/4000mAh 1.5C |
|
|
B attery Power |
512W H |
|
|
AC Power |
Sine wave A C 220V /50H z |
|
|
A C Peak V alue |
1000W peak maintenance time < 50ms |
|
|
Conversion Eff i ciency |
85% ≤ |
|
|
Class |
Project |
Specifications |
|
INTPUT |
DC input |
DC5521 12-24V -5A |
|
ACOUT 220V |
A C output voltage |
1 AC socket A C220V ± 5% |
|
A C output power |
500W |
|
|
A C output over power protection |
A bout 550W |
|
|
A C output waveform |
Correction wave |
|
|
A C output peak |
1000W peak maintenance time < 50ms |
|
|
Frequency |
50H z |
|
|
USB output port |
U sb1 output |
QC3.0 M A X 12V /1.5A |
|
U SB 2 output |
QC3.0 M A X 12V /1.5A |
|
|
TY PE-C1 output |
PD /QC3.0 M A X 12V /1.5A |
|
|
DC12V output |
D C1 D C2 output |
12V /10A M A X |
|
Type-C output / input |
TY PE-C2 |
Pd60w output |
|
Electric core |
type |
L i thium i ron phosphate cell 26700 / 4000m A h |
|
capacity |
20Ah (8S5P) |
|
|
power |
512WH |
|
|
cycle l i fe |
More than 1000 times |
|
|
Charging parameters |
|
D C 12-24V /5A 100W M A X |
|
Charging time |
6-7H |
Charge f rom 0% to 100% (automatic cut-off) |
|
Full voltage |
28.8V ± 0.1V |
The battery i s charged to the voltage at automatic cut-off |
|
L ed blue l ight |
D i splay the power, charge and stop charge status |
Power percentage and power column display |
|
D C, A C and inverter status |
L ed blue l ight display |
|
|
Boot static |
|
<10W |
|
Protection function |
|
Short circuit, overload, overtemperature, overvoltage, overcurrent, undervoltage, etc |
|
I nverter over temperature protection |
Over temperature protection |
≥ 85℃ |
|
Shutdown power consumption在· |
Over temperature recovery |
≤ 70℃ |
|
|
< 850uA |
|
Attention
● Strictly follow the operation steps of the product.
● For the heat dissipation space of the product, 5cm space is reserved around the product to make the heat dissipation convective.
● When the power of the product is insufficient, the load power exceeds the rated power or the ambient temperature is too high, the product will automatically start the protection function and turn off the output.
● For power charging, it is recommended to charge without load.
● If the power supply is not used for a long time, the power supply itself will be exhausted. Please make sure to charge it every 6 months.
● It is forbidden to use this product in flammable, explosive and corrosive gas environment such as gasoline and gas.
● If the product is accidentally flooded or invaded by other foreign substances, please send it to the
● Distribution Office for testing and treatment as soon as possible to ensure the safe use of the product. If it is caused by abnormal use, the company will charge for treatment according to the actual situation.
Precautions for Product Operation
● Strictly follow the operation steps of the product.
● For the heat dissipation space of the product, 5cm space is reserved around the product to make the heat dissipation convective.
● When the power of the product is insufficient, the load power exceeds the rated power or the ambient temperature is too high, the product will automatically start the protection function and turn off the output.
● For power charging, it is recommended to charge without load.
● If the power supply is not used for a long time, the power supply itself will be exhausted. Please make sure to charge it every 6 months.
● It is forbidden to use this product in flammable, explosive and corrosive gas environment such as gasoline and gas.
● If the product is accidentally flooded or invaded by other foreign substances, please send it to the Distribution Office for testing and treatment as soon as possible to ensure the safe use of the product. If it is caused by abnormal use, the company will charge for treatment according to the actual situation.
Product Scenarios
Specification
|
Model |
PPS500B |
|
|
Capacity |
4000m A h * 8 Series 5 parallel |
|
|
Cell |
26700/4000mAh 1.5C |
|
|
B attery Power |
512W H |
|
|
AC Power |
Sine wave A C 220V /50H z |
|
|
A C Peak V alue |
1000W peak maintenance time < 50ms |
|
|
Conversion Eff i ciency |
85% ≤ |
|
|
Class |
Project |
Specifications |
|
INTPUT |
DC input |
DC5521 12-24V -5A |
|
ACOUT 220V |
A C output voltage |
1 AC socket A C220V ± 5% |
|
A C output power |
500W |
|
|
A C output over power protection |
A bout 550W |
|
|
A C output waveform |
Correction wave |
|
|
A C output peak |
1000W peak maintenance time < 50ms |
|
|
Frequency |
50H z |
|
|
USB output port |
U sb1 output |
QC3.0 M A X 12V /1.5A |
|
U SB 2 output |
QC3.0 M A X 12V /1.5A |
|
|
TY PE-C1 output |
PD /QC3.0 M A X 12V /1.5A |
|
|
DC12V output |
D C1 D C2 output |
12V /10A M A X |
|
Type-C output / input |
TY PE-C2 |
Pd60w output |
|
Electric core |
type |
L i thium i ron phosphate cell 26700 / 4000m A h |
|
capacity |
20Ah (8S5P) |
|
|
power |
512WH |
|
|
cycle l i fe |
More than 1000 times |
|
|
Charging parameters |
|
D C 12-24V /5A 100W M A X |
|
Charging time |
6-7H |
Charge f rom 0% to 100% (automatic cut-off) |
|
Full voltage |
28.8V ± 0.1V |
The battery i s charged to the voltage at automatic cut-off |
|
L ed blue l ight |
D i splay the power, charge and stop charge status |
Power percentage and power column display |
|
D C, A C and inverter status |
L ed blue l ight display |
|
|
Boot static |
|
<10W |
|
Protection function |
|
Short circuit, overload, overtemperature, overvoltage, overcurrent, undervoltage, etc |
|
I nverter over temperature protection |
Over temperature protection |
≥ 85℃ |
|
Shutdown power consumption在· |
Over temperature recovery |
≤ 70℃ |
|
|
< 850uA |
|
Send us a Message
